1. Should be careful when carry glass and install glass part , glass of curtain wall usally should be installed from top to bottom.
For glass installation , from top to bottom , from left to right , should be staright and ajust to the excatly angle .the gap betwteen two glass camp should less than 350mm , screw should be very tight . ubble stick to close-grained, embedded depth of moderation, guarantee the weather resistance adhesive thickness between 3.5 mm to 4.5 mm. Weather resistance glue thin for ensure the quality of glass curtain wall sealing and prevent rainwater infiltration, too thick glue is easy to be pulled, disable seal and prevent leakage.

2. sepciall attention on silicon
when insert rubber, to clean the plastic injection, ensure the quality of rubber injection. Hanger installation construction glass, only to the construction, so every job must be well done,
once the rework is easy to damage the glass.

3, curtain wall on the transom adopts hanging, stainless steel brace bow with 5 x 15 Φ closed-end rivets, set a limit, limit the transom open extent, ensure safe and reliable transom.
The above content are according to the students the problems in the practical work of finishing, for your reference.